SpreadFire1A
New member
- Joined
- Sep 2019
- Messages
- 4
A forum I used to be on is longer around, and this seems like a nice and informative place. For 10 years I've built custom Pyro launch trailers and racks, but the larger trailers are getting to be a bit much for one guy to build. So, I'm keeping on with smaller trailers and the aluminum rack products I make.
For 1.3, metal racks (preferably aluminum) are the future, both for safety, ease of use, and long life, giving a good return on the investment. However, the heart of the SpreadFire Rack System are the End Supports. Since most people still use wood racks, I have Pro SpreadFire Wood Rack Kits available. It provides everything needed to mount three of your wood racks to the SpreadFire System. Like my Pro Aluminum racks, you can adjust use your racks vertically, and/or fan them in ten degree increments up to 20 degrees, simply by removing two L-Pins, tilting the rack(s), and re-inserting the L-Pins. No tools needed.
I'll also be hitting the market early next year with heavy duty 48 inch, 32 Cue slats/rails, like the old Pyro Magic rails, but better, using custom extrusions. I hope everyone has had a safe and prosperous display season. If you have any questions don't hesitate to contact me. I need to make some design changes to my web page, but you can check it out at www.starfiretrailers.com
For 1.3, metal racks (preferably aluminum) are the future, both for safety, ease of use, and long life, giving a good return on the investment. However, the heart of the SpreadFire Rack System are the End Supports. Since most people still use wood racks, I have Pro SpreadFire Wood Rack Kits available. It provides everything needed to mount three of your wood racks to the SpreadFire System. Like my Pro Aluminum racks, you can adjust use your racks vertically, and/or fan them in ten degree increments up to 20 degrees, simply by removing two L-Pins, tilting the rack(s), and re-inserting the L-Pins. No tools needed.
I'll also be hitting the market early next year with heavy duty 48 inch, 32 Cue slats/rails, like the old Pyro Magic rails, but better, using custom extrusions. I hope everyone has had a safe and prosperous display season. If you have any questions don't hesitate to contact me. I need to make some design changes to my web page, but you can check it out at www.starfiretrailers.com
Last edited:
